Back___________________Next__________________Home
Buy Your Industrial Control Products Here!
Gemco Part Description Page 3
| Part Number |
Product Category |
Description |
|---|---|---|
| 1950-1416 | Brake Parts | Ametek Gemco Switch. Obsolete 1/6 Precision Snap Switch, Single Pole Double Throw, Slow Make Slow Break with a Heavy duty / strong Spring for High Vibration Applications. Only one contact that is Normally Closed. Replaced by 1950-1414, though it is NOT an exact duplicate replacement, see specifications (<1LB) |
| 1950-4-B-A-AO | Brake Parts | Ametek Gemco Switch 1950 = Precision, Snap Action, Switch Assembly Mfg by Gemco 4 = Double Pole Double Throw / D.P.D.T., Eight Screw Terminals, can be wired for either a Normally Open or Normally Close Circuits B = Binder / Screw Terminals 8 A = Front Mounting AO = Switch Plunger operated via cam or roller follower U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC -50 to 185 Degree F Recommended replacement @ 15 million cycles (<1LB) |
| 1950-4-B-A-AR | Brake Parts | Ametek Gemco Switch 1950 = Precision, Snap Action, Switch Assembly Mfg by Gemco 4 = Double Pole Double Throw / D.P.D.T., Eight Screw Terminals, can be wired for either a Normally Open or Normally Close Circuits B = Binder / Screw Terminals 8 A = Front Mounting A = Switch Plunger operated via cam or roller follower R = Rubber boot for addition protection form humidity and dust U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC -50 to 185 Degree F Recommended replacement @ 15 million cycles (<1LB) |
| 1950-4-B-A-BR | Brake Parts | Ametek Gemco Switch. Precision Snap Limit Switch Unit. Double Pole Double Throw (D.P.D.T.) 2-NO / 2-NC, Plunger operated by Lever & 1/2 Inch Diameter Roller Assembly. Includes Boot |
| 1950-4-B-A-DO | Brake Parts | Ametek Gemco Switch. Precision Snap Action Switch Assembly. DPDT Double Pole Double Throw, Qty. 8 Screw Terminals, can be wired for either a Normally Open or Normally Close Circuit, Front Mounting, Plunger Push Operator, 2006 Type K, U.L. Listed (<1LB) |
| 1950-4-C-A-DO | Brake Parts | Ametek Gemco Switch. Precision Snap Action Limit Switch Assembly. Double Pole Double Throw / D.P.D.T., Eight Screw Terminals, can be wired for either Normally Open or Normally Closed Circuits.Front Mount, Plunger Push Operator. 915 / 917 Cycl-Set & 2006 K RS (<1LB) |
| 1950-4-P-A-AO | Brake Parts | Ametek Gemco Switch. Precision Snap Limit Switch Unit. D.P.D.T. Double Pole Double Throw 2-N.O 2-N.C , Plug-In Type Binder, Front Mounting Arrangement, Plunger Cam Operated. |
| 1950G-1-B-A-AR | Brake Parts | Ametek Gemco Switch. Precision Snap Limit Switch Unit with Gold Contacts, Single Pole Double Throw (S.P.D.T.), 1 NO - 1NC Contacts, Front Mounting, Plunger with Boot, Cam Operated U.L. Listed (<1LB) 1/8 |
| 1970-104 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 2 to 4 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek can detect a broken chain or belt via a supplied travel limit switch is a , spring loaded sub base for chain or belt tensioning and a shock and vibration isolator (9LBS) |
| 1970-106 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 5 to 6 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek can detect a broken chain or belt via a supplied travel limit switch is a , spring loaded sub base for chain or belt tensioning and a shock and vibration isolator (13LBS) |
| 1970-108 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 7 to 8 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek can detect a broken chain or belt via a supplied travel limit switch is a , spring loaded sub base for chain or belt tensioning and a shock and vibration isolator (16LBS) |
| 1970-112 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 9 to 12 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek can detect a broken chain or belt via a supplied travel limit switch is a , spring loaded sub base for chain or belt tensioning and a shock and vibration isolator (19LBS) |
| 1970-116 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 13 to 16 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek can detect a broken chain or belt via a supplied travel limit switch is a , spring loaded sub base for chain or belt tensioning and a shock and vibration isolator |
| 1970-120 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 17 or 20 Circuit Cam Box with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Drive-Chek serves 3 purposes; a broken chain or belt detector via a supplied travel limit switch, spring loaded sub base for chain or belt tensioning and a shock and vibration isolator |
| 1970-1204 | Brake Parts | Ametek Gemco Drive Chek. Drive Check for a Series 1980 Rotating Cam Limit Switch. 2 to 4 Circuit Frame with a NEMA 4 / 12 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Unit serves 3 purposes; a broken chain or belt detector, a chain or belt tightener and a shock / vibration isolator |
| 1970-1206 | Brake Parts | Ametek Gemco Drive Chek. Drive Check for a Series 1980 Rotating Cam Limit Switch. 5 to 6 Circuit Frame with a NEMA 4 / 12 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Unit serves 3 purposes; a broken chain or belt detector, a chain or belt tightener and a shock / vibration isolator |
| 1970-1208 | Brake Parts | Ametek Gemco Drive Chek. Drive Check for a Series 1980 Rotating Cam Limit Switch. 7 to 8 Circuit Frame with a NEMA 4 / 12 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Unit serves 3 purposes; a broken chain or belt detector, a chain or belt tightener and a shock / vibration isolator |
| 1970-1212 | Brake Parts | Ametek Gemco Drive Chek. Drive Check for a Series 1980 Rotating Cam Limit Switch. 5 to 6 Circuit Frame with a NEMA 12 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Unit serves 3 purposes; a broken chain or belt detector, a chain or belt tightener and a shock / vibration isolator |
| 1970-124 | Brake Parts | Ametek Gemco Drive Chek for Series 1980 Rotating Cam Limit Switches. For a 21 to 24 Circuit Frame with a NEMA 1 Enclosure. The Drive-Chek is a multi-purpose sub base that is mounted under a chain or drive belt driven mechanism. The Unit serves 3 purposes; a broken chain or belt detector, a chain or belt tightener and a shock or vibration isolator. |
| 1980 | Brake Parts | Ametek Gemco Series 1980 Micro-Adjust Rotating Cam Limit Switch Switch Settings 4 to 356 Degrees without a Tool - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 Model 1980-106-R-DP-X 1 = NEMA 1 Enclosure 6 = Qty. 6, Independent Cams / Circuits / Switches R = Right Hand Shaft Extension DP = DPDT Switches = Double Pole Double Throw X = No Timing Dial or timing dial window CAPE MAY NEW JERSEY MOVEABLE BRIDGE; Specification for rotating cam limit switch. The contractor shall provide a rotating cam limit switch that meets the specification as called out below. The cam box shall have 16 circuits each consisting of a micro adjust cam capable of dwells from 4 degrees through 356 degrees utilizing two cam halves. The cams shall be adjusted by use of a cam adjustment tool supplied with the cam box and mounted inside of the enclosure on a bracket. The cams are adjusted through a 36:1 ratio pinion assembly that will rotate each half of a circuit cam 10 degrees for each complete adjustment hub turn. The micro-adjust cams shall maintain an accuracy and repeatability of 1/4 degree. Each circuit shall have a precision rugged duty snap action switch with double break contacts that are actuated at a uniform rate to give long life. Electrical switches shall be SPDT with one NO and one NC contact per switch. Switches shall be rated for at least 15 million cycles. The input shaft shall be a 3/4" diameter made of 316 Stainless Steel having a # 606 woodruff key and can be located on the right end, left end or a double ended version can be specified. The enclosure, cover, latches, bearing flanges and flange bolts shall be constructed of 304 Stainless Steel meeting a NEMA 4X rating. The cam box shall utilize lifetime sealed ball bearings for the input shaft. The cam box shall be supplied standard with a three year warranty covering the entire unit. The cam box shall be manufactured by Ametek APT, Gemco division out of Clawson Michigan with no substitutions allowed. |
| 1980-101-R-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-101-R-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 01 = 1 Independent Cam / Circuit / Switch R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Warranty (10LBS) |
| 1980-102-L-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-102-L-DP-X Series 1980 1 = NEMA 1 Enclosure 02 = 2 Independent Cams / Circuits / Switches L = Left Hand Shaft Extension from enclosure DP = DPDT Switches / Double Pole Double Throw Snap Action Switch U.L. Listed X = No Timing Dial or Dial Window is provided 3 Year Warranty (11 LBS) |
| 1980-102-L-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-102-L-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 02 = 2 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (11LBS) |
| 1980-102-R-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 02 = 2 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty |
| 1980-103-L-DP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03 = 3 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Limited Warranty (11LBS) |
| 1980-103-L-DP-TD2 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-TD2 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03 = 3 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD2 = Timing Dial Labeled for C.C.W. Rotation 3 Year Limited Warranty (11LBS) |
| 1980-103-L-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03 = 3 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-103-L-GSP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-GSP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03 = 3 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension GSP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch. With Gold Plated Contacts Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided |
| 1980-103-L-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03 = 3 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (11LBS) |
| 1980-103-R-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-R-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03= 3 Independent Cams / Circuits / Switches R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch TD1 = Timing Dial Labeled for Clockwise Rotation 3 Year Warranty (12LBS) |
| 1980-103-R-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-103-R-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 03= 3 Independent Cams / Circuits / Switches R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Warranty (12LBS) |
| 1980-104-D-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-DP-X Series 1980 1 = NEMA 1 Enclosure 4 = 4 Cams / Circuits / Switches D = Double Shaft Extension from enclosure DP = DPDT Switches / Double Pole Double Throw X = No Timing Dial or Dial Window is provided (13LBS) |
| 1980-104-D-DPP-R-X-S-200-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-DPP-R-X-S-200-R Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches D = Shaft Extension Opposite the Gear Box, Double Shaft 2 DPP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch with a Plug in Socket R = Rubber boot Option on the switch plunger for additional moisture & dust protection X = No Timing Dial S= Straight Drive Gear Reducer 200 = 200 to 1 Gear Ratio R = Right End Gear Reducer |
| 1980-104-D-GSP-R-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch like Model 1980-104-L-GSP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension GSPR = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch. With Gold Plated Contacts & Rubber Seals for additional dust & moisture protection X = No Timing Dial or Dial Window is to be provided (12LBS) |
| 1980-104-D-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand D = Dual Shafts Extending from Enclosure, 2 SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Limited Warranty (14LBS) |
| 1980-104-D-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches D = Double Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial or Dial Window is provided 3 Year Warranty (12LBS) |
| 1980-104-L-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches L = Left Hand Shaft Extension from Enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-104-L-GSP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-GSP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension GSP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch. With Gold Plated Contacts Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided |
| 1980-104-L-SP-R-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-R-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-104-L-SP-TD2 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-TD2 Series 1980 1 = NEMA 1 Enclosure 4 = 4 Cams / Circuits / Switches L = Left Hand Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw TD2 = Timing Dial C.C.W. Counter Clock Wise Rotation |
| 1980-104-L-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-104-R-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-DP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 4 = 4 Independent Cams / Circuits / Switches R = Right Hand Shaft Extension from Enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Warranty (12LBS) |
| 1980-104-R-SP-R-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-R-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 R = Rubber Boot / Seal on the Switch Plunger for additional moisture & dust protection X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-104-R-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Limited Warranty (12LBS) |
| 1980-104-R-SP-TD2 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Limited Warranty (12LBS) |
| 1980-104-R-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-104-X-DP-X-S-10-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-10-R Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial S= Straight Drive Gear Reducer 10 = 10 to 1 Gear Ratio R = Right End Gear Reducer (18LBS) |
| 1980-104-X-DP-X-S-1000-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-1000-R1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 4 = 4 Independent Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial S= Straight Drive Gear Reducer 1000 = 1000 to 1 Gear Ratio R = Right End Gear Reducer Location |
| 1980-104-X-DP-X-S-25-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-25-R Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch X = No Timing Dial S= Straight Drive Gear Reducer 25 = 25 to 1 Gear Ratio R = Right End Gear Reducer (18LBS) |
| 1980-104-X-SP-X-R-400-R1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-400-R1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand X = No shaft extension opposite gearbox / no double shaft extension SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided R= Right Angle Gear Reducer 400 = 400 to 1 Gear Ratio R1 = Right End Gear Reducer Shaft Location 1 |
| 1980-104-X-SP-X-R-5-R1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-5-R1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand X = No shaft extension opposite gearbox / no double shaft extension SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided R= Right Angle Gear Reducer 5 = 5 to 1 Gear Ratio R1 = Right End Gear Reducer Shaft Location 1 |
| 1980-104-X-SP-X-R-8-R1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-8-R1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 4 = 4 Independent Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial R= Right Angle Gear Reducer 8 = 8 to 1 Gear Ratio R1 = Right End Gear Reducer Shaft Location 1 |
| 1980-104-X-SP-X-S-200-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-200-R Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 04 = 4 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand X = No Shaft Extension Opposite the Gear Box SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial S = Straight Drive Gear Reducer 200 = 200 to 1 Gear Ratio R = Right End Shaft Location |
| 1980-105-L-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-TD1 Series 1980 1 = NEMA 1 Enclosure 05 = 5 Independent Cams / Circuits / Switches L = Left Hand Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Warranty |
| 1980-105-L-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 05 = 5 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (14LBS) |
| 1980-105-R-DP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-DP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Enclosure 05 = 5 Independent Cams / Circuits / Switches R = Right Hand Shaft Extension from enclosure DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch X = No Timing Dial or Dial Window is provided 3 Year Warranty (14LBS) |
| 1980-105-R-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 05 = 5 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation (14LBS) |
| 1980-105-R-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 05 = 5 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand R = Right Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 X = No Timing Dial or Dial Window is to be provided 3 Year Limited Warranty (12LBS) |
| 1980-105-X-SP-X-R-1-L7 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-R-1-L7 Series 1980 1 = NEMA 1 Enclosure 05 = 5 Independent Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box SP = SPDT Switches, Single Pole Double Throw Precision Snap Action Switches X = No Timing Dial R= Right Angle Gear Reducer 1 = 1 to 1 Gear Ratio L7 = Left End Gear Reducer Shaft Location 7 |
| 1980-105-X-SP-X-S-14-R | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-S-14-R Series 1980 1 = NEMA 1 Enclosure 5 = 5 Cams / Circuits / Switches X = No Shaft Extension Opposite the Gear Box SP = SPDT Switches, Single Pole Double Throw X = No Timing Dial S= Straight Drive Gear Reducer 14 = 14 to 1 Gear Ratio R = Right End Shaft Location |
| 1980-106-D-SP-TD2 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-SP-TD2 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 06 = 6 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand D = Dual Shafts Extending from Enclosure, 2 SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD2 = Timing Dial Labeled for Counter Clock Wise Rotation 3 Year Limited Warranty (16LBS) |
| 1980-106-D-SP-X | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-SP-X Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 06 = 6 Independent Cams / Circuits / Switches D = Double Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch X = No Timing Dial or Dial Window is to be provided 3 Year Warranty (14LBS) |
| 1980-106-L-SP-TD1 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD1 Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell 1 = NEMA 1 Rated Enclosure 06 = 6 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand L = Left Hand Shaft Extension from Enclosure SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial Labeled for C.W. Rotation 3 Year Limited Warranty (14LBS) |
| 1980-106-L-SP-TD2 | Brake Parts | Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD2 Series 1980 1 = NEMA 1 Enclosure 06 = 6 Independent Cams / Circuits / Switches L = Left Hand Shaft Extension from enclosure SP = SPDT Switches / Single Pole Double Throw TD2 = Timing Dial Labeled for C.C.Wise Rotation 3 year Warranty |
Fenton, MO 63026
Phone: (636) 537-0202
E:mail: [email protected]