< Gemco Part Description Brake Parts
Spec Tech Industrial

Back___________________Next__________________Home

Buy Your Industrial Control Products Here!

Gemco Parts Description Page 29


Part
Number
Product
Category
Description
J003080 Brake Parts Ametek Gemco Brake Fluid Reservoir Bleeder. OBSOLETE, replaced by PSD-0180101. Includes a Solenoid Operated Valve which is controlled by a remotely mounted switch which is not included. 230 Volt DC, Fluid Capacity 2-1/3 rd Quart. Replaced by PSD0180101 (13LBS)
J003082 Brake Parts Ametek Gemco Brake Fluid Reservoir Bleeder. OBSOLETE, replaced by PSD0180100. Ametek Gemco Brake Fluid Reservoir Bleeder. Includes a Solenoid Operated Valve which is controlled by a remotely mounted switch which is not included. 440 Volt AC, 50/60 Hz., 45VA. Fluid Capacity 2-1/3 rd Quart. Net Weight 9 LBS Replaced by PSD-0180100 110 Volt
J003083 Brake Parts Ametek Gemco Brake Fluid Reservoir Bleeder. OBSOLETE, replaced by PSD0180100. Ametek Gemco Brake Fluid Reservoir Bleeder. Includes a Solenoid Operated Valve which is controlled by a remotely mounted switch which is not included. 110 Volt AC, 50/60 Hz., 45VA. Fluid Capacity 2-1/3 rd Quart. Net Weight 9 LBS Replaced by PSD-0180100. (ISGSAP1267689)
J003205 Brake Parts Ametek Gemco Brake Assembly. 8 X 3 Inch Type HM Brake, 200 FT LBS Manual Operation / 450 FT LBS Air over Hydraulic Operation. HM = Spring Set Parking & Holding 50 FT LBS, includes actuator (32LBS)
J004954 Brake Parts Ametek Gemco Brake Lining, 10 Inch Diameter, Hydraulic, drilled and countersunk for 8 brass fasteners
J005137 Brake Parts Ametek Gemco Bushing. Tube Bushing for brake lines (<1LB)
J005138 Brake Parts Ametek Gemco Clamp. Bushing Clamp for brake lines (<1LB)
J005780 Brake Parts Ametek Gemco Hose Bracket for the armored hose
J006110 Brake Parts Ametek Gemco Brake Shoe & Lining for a 10 Inch Hydraulic Brake J002926. Bonded linings with new pin & hardware Qty. 1, 2 per brake assembly (13LBS)
J006693 Brake Parts Ametek Gemco Bushing. Knuckle Bushing on a 14 or 18 Inch Brake (1LB) ISG SAP 1111645
J006694 Brake Parts Ametek Gemco Eye Bolt Bushing used on a 10, 14 or 18 Inch Hyd. Brake ISG SAP 1111273
J006696 Brake Parts Ametek Gemco Pin on a 14 or 18 Inch Brake Assembly. Connects top of the hydraulic actuator to the lever arm.1/2 Inch Diameter X 2.375" Long. Smallest solid pin with two holes for cotter pins. 1 per brake CMH000180 (<1LB)
J006816 Brake Parts Ametek Gemco Pin on a 14 Inch Brake Assembly. Mounts shoes & the bottom of both brake arms. 5.875 Inch Long X 1 Inch Diameter 0.875-14 Thread. Largest Pin on the brake. 4 per brake.
J006817 Brake Parts Ametek Gemco Pin on a 14 or 18 Inch Brake Assembly. Connects lever arm to the brake arm & lever arm to knuckle. 4.5 Inch Long X 1 Inch Diameter, .875-14 Thread, 2 per brake (1LB)
J006818 Brake Parts Ametek Gemco Pin on the 14 or 18 Inch Brake Assembly. Connects eye bot to the brake arm. 3.5 Inch Long X 1 Inch Diameter. Smallest threaded pin in length. 1 per brake CMU0015555 (1LB)
J006873 Brake Parts Ametek Gemco Pin on a 14 or 18 Inch Brake Assembly. Connects the bottom of the hydraulic actuator to the brake arm.Soild pin 2 holes for cotter pins. 1 per brake (<1LB)
J006874 Brake Parts Ametek Gemco Pin on an 18 Inch Brake Assembly. 4 per brake. 2 for Brake Shoes & 2 for Brake Shoe Arms (1LB)
J006912 Brake Parts Ametek Gemco Head & Barrel Assembly for a 1 & 3/4 Inch Control Cylinder J017616. Ref # 15 Includes items 14 thru 19. For I.D. has an "X" is cast into its side. 2.85" long It is the complete hydraulic section for repair of a J017616 Control Cylinder (5 LBS) 
J006940 Brake Parts Ametek Gemco Bushing ISG SAP 1111272 (1LB)
J006941 Brake Parts Ametek Gemco Bushing ISG SAP 1111634 (1LB)
J006942 Brake Parts Ametek Gemco Pin on a 10 Inch Hyd Brake. Brake Shoe & Brake Arm Pin. 4 per brake. Sold each. 4.875 Inch Long, .75 Inch Diameter, 9/16 - 18 Thread (1LB) M00034717
J006943 Brake Parts Ametek Gemco Pin, 3 & 5/16 Long, .75 Inch Diameter, 9/16-18 Thread, 3 on 10 Inch Brake 
J006944 Brake Parts Ametek Gemco Spring Hook for a 10 Inch Hyd brake. Item 12 & 13, 2 per brake, same as J006945 (1LB)
J006945 Brake Parts Ametek Gemco Spring Hook for a 10 Inch Hyd brake. Item 12 & 13, 2 per brake, same as J006944 (1LB) ISG SAP 1163102
J006946 Brake Parts Ametek Gemco Pin for a Hyd Actuator, Bottom, 2 & 3/8th Inches Long, secured by 2 cotter pins (1LB)
J006953 Brake Parts Ametek Gemco Pin on a 10 Inch Hyd Brake. Top Pin thru lever, supports return springs. 3 & 7/8 Inches Long, secured by 2 cotter pins (1LB)
J007158 Brake Parts Ametek Gemco Lever. Lever on a Control Cylinder. Main shaft to plunger on the head & barrel. Ref. Item # 5 (1LB)
J007268 Brake Parts Ametek Gemco Yoke & Rod End, Machined, 14 & 18 Inch Brakes
J007346 Brake Parts Ametek Gemco Plug. Adaptor Plug with Bleeder Outlet (<1LB)
J007841 Brake Parts Ametek Gemco Actuator / Slave Cylinder on a 6 Inch J23020 or 8 Inch & J02779 Hyd Brake. Item 19A, 1 per brake. A recommended spare part (5LBS)
J007844 Brake Parts Ametek Gemco Brake Shoe Assembly. Brake Shoe & Lining complete with bushings for J002779 or J003205 8 Inch Hydraulic Brake. Ref #2 2 per brake. Sold each (7LBS)
J007846 Brake Parts Ametek Gemco Lining. Drilled Lining, 8 Inch Diameter for a 8 Inch Hydraulic Brake Assembly. Ref Item 3. Qty. 8 drilled & countersunk holes for brass fastener J000387 which is not included (1LB)
J007905 Brake Parts Ametek Gemco Actuator. Hydraulic Actuating / Slave Cylinder, 1.125 Inch Diameter Bore, 3 inch Stroke. For use on a 10, 14, or 18 Inch Manual single brake system. Casting # on cylinder body 7985 (6LBS) Mittal 1085522 
J007985 Brake Parts Ametek Gemco casting part number for a actuating / slave cylinder. Can be manufactured into three different size units. Finished part number required. J007905 - J008765 - J0023437
J007996 Brake Parts Ametek Gemco Rod End Assembly
J008040 Brake Parts Ametek Gemco Lever & Bushing for a 10 Inch Hyd Brake Type HM, Item 14, 1 per brake, 2822 Lever & Bushing (11LBS)
J008120 Brake Parts Ametek Gemco Spring Arm 10 Inch
J008122 Brake Parts Ametek Gemco Spring, 10 Inch, Centering (1LB)
J008124 Brake Parts Ametek Gemco 14 Inch Spring Arm (2LBS)
J008126 Brake Parts Ametek Gemco 14 Inch Hyd. Centering Spring
J008128 Brake Parts Ametek Gemco 18 Inch Spring Arm ISG SAP 1087054
J008134 Brake Parts Ametek Gemco 10 Inch Return Spring (2LB) ISG SAP 1237192
J008135 Brake Parts Ametek Gemco Spring. Main Return Spring for a 14 or 18 Inch Hydraulic Brake Assembly (1 LB) ISG SAP 1237193
J008178 Brake Parts Ametek Gemco Bushing. Obsolete by about 8 years. Bushing between pedal & control cylinder shaft.  
Purchase new pedal J008219 which no longer requires the bushing
J008219 Brake Parts Ametek Gemco Pedal. Brake Pedal by 18 Inches for use on Control / Master Cylinder. Cast Iron Item # 34 (8LBS) Mittal 1197677
J008474 Brake Parts Ametek Gemco OBSOLETE Coil 230 Volt DC for FRB
J008477 Brake Parts Ametek Gemco Obsolete Coil 115 Volt AC for FRB
J008765 Brake Parts Ametek Gemco Hydraulic Actuator Actuating / Slave Cylinder, 1.125 Inch Diameter Bore, 2.5 Inch Stroke. Manufactured for P&H / Morris. Casting # on cylinder body 7985 (6LBS)
J008905 Brake Parts Ametek Gemco Actuating Cylinder, 1.125 Inch Diameter, Brass Cylinder, Chrome Plated Parts, for corrosive environments, like 7905 Old Price
J009391 Brake Parts Ametek Gemco Pin Guide
J009392 Brake Parts Ametek Gemco Guide. Spring Guide on a J007841 Act Cyl. Item 20. 1 per brake (<1LB)
J009395 Brake Parts Ametek Gemco Spring. Return Spring in a J007841 Act. Cyl. Item 18, 1 per brake,6 or 8 Inch Hyd Brake (<1LB) ISG 237196
J009396 Brake Parts Ametek Gemco Connecting Rod with Threaded Cap. Part of the Actuator J007841 on a 6 or 8 Inch Hyd Brake. Ref # 17, 1 per brake (1LB) ISG SAP 1218454
J009400 Brake Parts Ametek Gemco Cover. Slave Cylinder Cover / Sleeve on a J007841 Brake Actuator. Item 22, 1 per brake, used on a 6 Inch J23020 or 8 Inch & J02779 Hyd Brake (1LBS)
J009431 Brake Parts Ametek Gemco Adjusting Sleeve Knuckle on a 6 or 8 Inch Hydraulic Brake. Ref. item # 14. 1 per brake
J009637 Brake Parts Ametek Gemco Knuckle 5020 with Bushings for the 14 & 18 Inch brakes (5LBS) ISG SAP 1111277
J009638 Brake Parts Ametek Gemco Adjusting Nut, only available in Adjusting Nut Kit 105193, for the 14 & 18 inch brakes.
J009668 Brake Parts Ametek Gemco Tubular Push Rod, 14" & 18" H Brakes
J009672 Brake Parts Ametek Gemco Bushing
J009674 Brake Parts Ametek Gemco Bushing
J009677 Brake Parts Ametek Gemco Cylinder. Cylinder & boss Assembly. Cover on an Air Releasing Cylinder. Type "S" Brakes J023033 & J023034 (1LB)
J009681 Brake Parts Ametek Gemco Mounting Lug (2LBS)
J009688 Brake Parts Ametek Gemco Mounting Extension for an 18 Inch HM Cylinder
J009704 Brake Parts Ametek Gemco Cup 1 & 1/8th Inch Diameter for use in a Hydraulic Actuator J007905 orJ008765 aka JFC-9704 (<1LB)
Updated on April 3rd 2019
2509 Cassens Drive
Fenton, MO 63026
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: [email protected]