| Part Number: |
Description: |
| 142055 |
Replacement DeviceNet Master Connector for GLC150 Type D or CA2-DNMALL-41 |
| 142720 |
Terminal Block, 32 point I/O for GLC150 Type A1, A2 and B+ |
| 142722 |
I/O Cable 1m, connects terminal block (142720) to GLC150 Type A1, A2 or B+ |
| 142723 |
I/O Cable 2m, connects terminal block (142720) to GLC150 Type A1, A2 or B+ |
| 144397 |
Enclosure w/door, Open Back for ST40x models |
| 3112T-PDWS |
12.1” SVGA Pro-Designer Pre-loaded WorkStation |
| 3115T-PDWS |
15.1” SVGA Pro-Designer Pre-loaded WorkStation |
| 4115T-2000-256-2K |
LIGHT-DUTY FLAT PANEL INDUSTRIAL PC |
| 4615T-2000-512-RAID-CD-F-XP |
RAID ENABLED INDUSTRIAL PC |
| 510-1000-004 |
24VDC, 1Amp power supply, Din Rail Mount Class I Div 2 |
| 510-1000-041 |
24VDC, 2Amp power supply, Din Rail Mount Class I Div 2 |
| ABI-31200-C2P/ABD |
10.5" TFT w/AB DH+, 110VAC |
| ABI-31200-C2P/ABR |
10.5" TFT w/AB RIO, 110VAC |
| ABI-31200-C2P/DVN |
10.5" TFT w/DeviceNet, 110VAC |
| ABI-31200-C2P/SER |
10.5" TFT Serial, 110VAC |
| ABI-3D200-C2P/ABD |
10.5" TFT w/AB DH+, 24VDC |
| ABI-3D200-C2P/ABR |
10.5" TFT w/AB RIO, 24VDC |
| ABI-3D200-C2P/DVN |
10.5" TFT w/DeviceNet, 24VDC |
| ABI-3D200-C2P/SER |
10.5" TFT Serial, 24VDC |
| ABI-CTDE-0000/ABR |
10.5" TFT Ethernet w/AB RIO, 24VDC |
| ABK-3D200-C2P/ABD |
6" TFT w/AB DH+, 24VDC |
| ABK-3D200-C2P/ABR |
6" TFT w/AB RIO, 24VDC |
| ABK-3D200-C2P/DVN |
6" TFT w/AB DeviceNet, 24VDC |
| ABK-3D200-C2P/SER |
6" TFT Serial 24VDC |
| ABK-3D200-S2P/ABD |
6" STN w/AB DH+, 24VDC |
| ABK-3D200-S2P/ABR |
6" STN w/AB RIO, 24VDC |
| ABK-3D200-S2P/DVN |
6" STN w/AB DeviceNet, 24VDC |
| ABK-3D200-S2P/SER |
6" STN Serial 24VDC |
| ABK-STDN-0000/ABD |
6" STN w/AB DH+, 24VDC |
| ABK-STDN-0000/ABR |
6" STN w/AB RIO, 24VDC |
| ABK-STDN-0000/DVN |
6" STN w/AB DeviceNet, 24VDC |
| ABK-STDN-0000/SER |
6" STN Serial 24VDC |
| AGP3300-L1-D24 |
5.7" Monochrome, 2 Serial, 1 USB, Ethernet, 24VDC |
| AGP3300-L1-D24-D81C |
5.7" Mono, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Source), 24V |
| AGP3300-L1-D24-D81K |
5.7" Mono, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Sink), 24V |
| AGP3300-L1-D24-FN1M |
5.7" Mono, 2 Serial, 1 USB, Ethernet, Flex Network, 24VDC |
| AGP3300-S1-D24 |
5.7" STN, 2 Serial, 1 USB, Ethernet, 24VDC |
| AGP3300-S1-D24-D81C |
5.7" STN, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Source), 24V |
| AGP3300-S1-D24-D81K |
5.7" STN, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Sink), 24V |
| AGP3300-T1-D24 |
5.7" TFT, 2 Serial, 1 USB, Ethernet, , 24VDC |
| AGP3300-T1-D24-D81C |
5.7" TFT, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Source), 24V |
| AGP3300-T1-D24-D81K |
5.7" TFT, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Sink), 24V |
| AGP3300-T1-D24-FN1M |
5.7" TFT, 2 Serial, 1 USB, Ethernet, Flex Network, 24V |
| AGP3301-L1-D24 |
5.7" Mono, 2 Serial, 1 USB 24VDC |
| AGP3301-S1-D24 |
5.7" Color STN 2 Serial, 1 USB, 24VDC |
| AGP3302-B1-D24 |
5.7" Blue/White LCD, 2 Serial, 1 USB, 24VDC |
| AGP3400-S1-D24 |
7.5" STN, 2 Serial, 1 USB, Ethernet, 24VDC |
| AGP3400-S1-D24-D81C |
7.5" STN, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Source), 24VDC |
| AGP3400-S1-D24-D81K |
7.5" STN, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Sink), 24VDC |
| AGP3400-T1-D24 |
7.5" TFT, 2 Serial, 1 USB, Ethernet, 24VDC |
| AGP3400-T1-D24-D81C |
7.5" TFT, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Source), 24VDC |
| AGP3400-T1-D24-D81K |
7.5" TFT, 2 Serial, 1 USB, Ethernet, Discrete 6 In 2 Out (Sink), 24VDC |
| AGP3400-T1-D24-FN1M |
7.5" TFT, 2 Serial, 1 USB, Ethernet, Flex Network, 24VDC |
| AGP3450-T1-D24 |
7.5" TFT, 2 Serial, 1 USB, Sound, Video, Ethernet, 24VDC |
| AGP3500-L1-D24 |
10.4" Mono, 2 Serial, 2 USB, 24VDC |
| AGP3500-L1-D24-D81C |
10.4" Mono, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 24V |
| AGP3500-S1-AF |
10.4" STN, 2 Serial, 2 USB, Ethernet, 100-240VAC |
| AGP3500-S1-AF-D81C |
10.4" STN, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source)100-240AC |
| AGP3500-S1-AF-D81K |
10.4" STN, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 100-240AC |
| AGP3500-S1-D24 |
10.4" STN, 2 Serial, 2 USB, Ethernet, 24VDC |
| AGP3500-S1-D24-D81C |
10.4" STN, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 24V |
| AGP3500-S1-D24-D81K |
10.4" STN, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 24V |
| AGP3500-T1-AF |
10.4"TFT, 2 Serial, 2 USB, Ethernet, 100-240AC |
| AGP3500-T1-AF-D81C |
10.4" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 100-240AC |
| AGP3500-T1-AF-D81K |
10.4" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 100-240AC |
| AGP3500-T1-AF-FN1M |
10.4" TFT, 2 Serial, 2 USB, Ethernet, Flex Network, 100-240AC |
| AGP3500-T1-D24 |
10.4"TFT, 2 Serial, 2 USB, Ethernet, 24VDC |
| AGP3500-T1-D24-D81C |
10.4" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 24V |
| AGP3500-T1-D24-D81K |
10.4" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 24V |
| AGP3500-T1-D24-FN1M |
10.4" TFT, 2 Serial, 2 USB, Ethernet, Flex Network, 24V |
| AGP3550-T1-AF |
10.4"TFT, 2 Serial, 2 USB, Sound, Video, Ethernet, 100-240AC |
| AGP3600-T1-AF |
12.1"TFT, 2 Serial, 2 USB, Ethernet, 100-240AC |
| AGP3600-T1-AF-D81C |
12.1" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 100-240AC |
| AGP3600-T1-AF-D81K |
12.1" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 100-240AC |
| AGP3600-T1-AF-FN1M |
12.1" TFT, 2 Serial, 2 USB, Ethernet, Flex Network, 100-240AC |
| AGP3600-T1-D24 |
12.1"TFT, 2 Serial, 2 USB, Ethernet, 24VDC |
| AGP3600-T1-D24-D81C |
12.1" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Source), 24VDC |
| AGP3600-T1-D24-D81K |
12.1" TFT, 2 Serial, 2 USB, Ethernet, 6 In 2 Out (Sink), 24VDC |
| AGP3600-T1-D24-FN1M |
12.1" TFT, 2 Serial, 2 USB, Ethernet, Flex Network, 24VDC |
| AGP3650-T1-AF |
12.1"TFT, 2 Serial, 2 USB, Sound, Video, Ethernet, 100-240AC |
| AGP3750-T1-AF |
15"TFT, 2 Serial, 2 USB, Sound, Video, Ethernet, 100-240AC |
| AGP3750-T1-D24 |
15"TFT, 2 Serial, 2 USB, Sound, Video, Ethernet, 24VDC |
| CA1-COSALL-21 |
CANopen Slave comm module |
| CA1-DNSALL-21 |
DeviceNet Slave comm module |
| CA1-PFSALL-21 |
Profibus DP Slave comm module for GP2000 units, CE |
| CA1-STDLRG-01 |
Desktop Stand for GP250x and GP260x units |
| CA1-WMALRG-01 |
Wall Mount Adapter for GP2000H handhelds, GP250x and GP260x units |
| CA2-DNMALL-41 |
DeviceNet Master comm module, UL, CE for GLC2000 units only |
| CA2-ISOALL232-01 |
RS-232 Port Isolator for GP/GLC2000, PanelStation 25Pin D-sub serial ports |
| CA2-ISOALL422-01 |
RS-422 Port Isolator for GP/GLC2000, PanelStation 25Pin D-sub serial ports |
| CA2-PFMALL-21 |
Profibus DP Master comm module CE, for GLC2000 units only |
| CA2-PFMALL-UTIL |
Profibus DP Master configuration software for use with CA2-PFMALL-21 |
| CA3-ADPCOM-01 |
Port adapter 9 pin Dsub socket to 9 pin Dsub socket. Connects optional RS422 communication items to AGP3000 Com Port 1 |
| CA3-ADPSEI-01 |
Adapter Connects Siemens PLC to AGP3000 RS485 COM 2 port.9 pin d-sub plug to 9pin d-sub socket |
| CA3-ADPTRM-01 |
Adapter: 9 pin Dsub plug to screw terminals. For COM 2 of AGP3000 |
| CA3-ATFALL-01 |
Mounting Fasteners, 1 set of 4 fasteners for AGP3000 units |
| CA3-BLU12-01 |
AGP3600T, AGP3650T Replacement backlight TFT Color |
| CA3-BLU15-01 |
AGP3750T Replacement backlight TFT Color |
| CA3-CBL232/5M-01 |
RS-232C cable, 5M, connects to AGP3000 COM 1/ ST401 other end is 25pin D-sub male |
| CA3-CBL422/5M-01 |
RS-422 cable, 5M, connects to AGP3000 COM 1 ST400/402, other end is 6 wire spade lug |
| CA3-CBL422-01 |
RS-422 cable, AGP3000 Com Port 2 with open ended wires at other end for connecting to 3rd party screw terminal devices. |
| CA3-CBLA-01 |
A Series RS-422, 5M, connects AGP3000/ST400 to MITSUBSHI A PLC |
| CA3-CBLCBT232-01 |
Adapter cable: RS232 9 to 25 pin Dsub socket 0.2m length for use with HMI-CAB-Cxxx cables |
| CA3-CBLCBT422-01 |
Adapter cable: RS422 9 to 25 pin Dsub socket 0.2m length for use with HMI-CAB-Cxxx cables |
| CA3-CBLFX/1M-01 |
FX, FXO Connects GP/GLC to PLC program port FX, FXO viaRS-422 25 pin D-sub (note: FXO requires Adapter) |
| CA3-CBLFX/5M-01 |
FX, FXO Connects GP/GLC to PLC program port FX, FXO viaRS-422 25 pin D-sub (note: FXO requires Adapter) |
| CA3-CBLLNKMQ-01 |
Q/QnA RS-232 Link Cable, 5M, connects AGP3000 to Q/QnA PLC |
| CA3-CBLMLT-01 |
RS-422/485 Multi-link PLC Cable, 5M: Connects AGP3000 Com Ports via Online adapter or port adapter. Other end is open wires. |
| CA3-CBLQ-01 |
Q Series RS-232, 5M, connects AGP3000/ST401 to Q series PLC |
| CA3-CBLSYS-01 |
SYSMAC RS-232C cable, 5M, connects AGP3000/ST401 to PLC |
| CA3-CFCALL/128MB-01 |
128MB Compact Flash card for GP2000, GP2001 and IT2400 |
| CA3-CFCALL/256MB-01 |
256MB Compact Flash card |
| CA3-CFCALL/512MB-01 |
512MB Compact Flash card for Pro-face products |
| CA3-CFCALL/64MB-01 |
64MB Compact Flash card |
| CA3-DFS12-01 |
12.1” Touch Screen Protection Sheet (Qty 5) AGP3600/3650 units |
| CA3-DFS15-01 |
15” Touch Screen Protection Sheet (Qty 5) AGP3700 TFT and AGP3750 units only |
| CA3-DFS6-01 |
5.7” Touch Screen Protection Sheet (Qty 5) AGP3300/3302 units |
| CA3-ISO232-01 |
RS-232 Port Isolator for AGP3000 serial port |
| CA3-ISO485-01 |
RS-485 Port Isolator for AGP3000 Com 2 serial port |
| CA3-MBPALL-41 |
Modbus Plus comm. Module, UL, CE (See Note 1) |
| CA3-MBPALL-411 |
Modbus Plus comm module for QPK-CTxE unit only UL |
| CA3-MDCB11 |
AGP3000 Adapter cable RS-422, 5m, for 2 Port Adapter II (GP070-MD11) |
| CA3-USBCB-01 |
AGP3000 Programming Cable: Connects AGP3000 USB Port to PC USB Port |
| CA4-ADPONL-01 |
Online adapter 9 pin Dsub plug to 9 pin Dsub socket. Required adapter when using AGP3000 COM 2 RS422/RS485 communications |
| CA4-ATM10-01 |
AGP3500T Panel Adapter: Mounts AGP3500 in GP2500 cutout |
| CA4-ATM5-01 |
AGP3300 Panel Adapter: Mounts AGP3300 in GP37W2 or GP37W3 cutout |
| CA5-AUXCNALL-01 |
Replacement Aux connector for AGP3000 series for sound, buzzer, reset I/O |
| CA5-BLU10T-01 |
AGP3500T, AGP3550T Replacement backlight TFT Color |
| CA5-DFS10-01 |
10.4” Touch Screen Protection Sheet (Qty 5) AGP3500 TFT and AGP3550 TFT units only |
| CA5-PFSALL/EX-01 |
Profibus DP Slave comm module |
| CA5-USBATL-01 |
Replacement USB Cable clamp for HMIs with 2 USB ports to prevent disconnection |
| CA5-USBATM-01 |
Replacement USB Cable clamp for HMIs with 1 USB port to prevent disconnection |
| CA5-USBEXT-01 |
USB Extension Cable: 1M, Front Panel adapter cable allows USB access through front of a panel enclosure |
| CA6-DIOCNALL-01 |
Replacement Discrete I/O Connector for AGP3000 unit (set of 5 connectors) |
| CA6-FNCNALL-01 |
Replacement Flex Network Connector for AGP3000 unit (set of 5 connectors) |
| CA6-USB232-01 |
AGP3000 USB to Serial Port Converter Cable (For Use with Modems) |
| DR2-B121BD |
PRO-iO2 12(4)-point DC24V (Former model compatible) |
| DR2-B121FU |
PRO-iO2 12-point AC100V (Former model compatible) |
| DR2-B201BD |
PRO-iO2 20(6)-point DC24V (Former model compatible) |
| DR2-B201FU |
PRO-iO2 20-point AC100V (Former model compatible) |
| DR2-CBL01 |
PRO-iO2 Transfer Cable |
| DR2-D101BD |
PRO-iO2 10-point DC24V (Non-display) |
| DR2-D101FU |
PRO-iO2 10-point AC100V (Non-display) |
| DR2-D201BD |
PRO-iO2 20(2)-point DC24V (Non-display) |
| DR2-D201FU |
PRO-iO2 20-point AC100V (Non-display) |
| DR2-MEM01 |
PRO-iO2 Memory Pack |
| DR2-SFT01 |
PRO-iO2 Editor |
| DR3-B101BD |
PRO-iO2 10(4)-point DC24V |
| DR3-B101FU |
PRO-iO2 10-point AC100V |
| DR3-B261BD |
PRO-iO2 26(6)-point DC24V |
| DR3-B261FU |
PRO-iO2 26-point AC100V |
| DR3-XT141BD |
PRO-iO2 Expansion Unit 14-point DC24V |
| DR3-XT141FU |
PRO-iO2 Expansion Unit 14-point AC100V |
| DR3-XT61BD |
PRO-iO2 Expansion Unit 6-point DC24V |
| DR3-XT61FU |
PRO-iO2 Expansion Unit 6-point AC100V |
| EX-ED-LICENSE |
One additional user license for GP PRO EX |
| EX-ED-LICENSE-V11 |
One additional user license for GP PRO EX |
| EX-ED-Upgrade |
Upgrade to latest version of GP-PRO EX – Requires serial number of Customer’s current GP PRO EX software |
| EX-ED-V10 |
GP-PRO EX HMI Development software (download cable not included) |
| EX-ED-V11 |
GP-PRO EX HMI Development software (download cable not included) |
| EX-MOVCON-LICENSE |
AGP3000 Movie Converter software, required to convert videos into AGP3000 series format. Optional software for use with EX-ED-V11 |
| EX-SDV-V10 |
Pro-Server EX Ver 1.0 with Pro-Studio. Development software and one Server runtime license |
| EX-SED-LICENSE |
Pro-Server EX Ver 1.0 Additional Pro-Studio Developer license(requires EX-SDV-V10) |
| EX-SRT-LICENSE |
Pro-Server EX Ver 1.0 Additional Server Runtime license (requires EX-SDV-V10) |
| FGW-SE41-24V |
Ethernet w/ RS-232/RS-422 Serial Port, 24VDC, UL/cUL, CE |
| FN-AD02AH41 |
2-Channel Analog Input: 0-10VDC 0-20ma, 4-20ma (CE/UL/cUL) |
| FN-AD04AH11 |
4-Channel Analog Input: 0-10VDC, +/-10VDC, 0-20ma, 4-20ma |
| FN-CABLE-2010-31-MS |
10 Meter Flex Network Cable |
| FN-CABLE-2050-31-MS |
50 Meter Flex Network Cable |
| FN-CABLE-2200-31-MS |
200 Meter Flex Network Cable |
| FN-DA02AH41 |
2-Channel Analog Output: 0-10VDC 0-20ma, 4-20ma (CE/UL/cUL) |
| FN-DA04AH11 |
4-Channel Analog Output 0-10VDC, +/-10VDC, 0-20ma, 4-20ma |
| FN-HC10SK41 |
High-speed Counter input (200Khz) w/ comparator outputs (CE/UL/cUL) |
| FN-IFCN01 |
Flex Network Connector for GLC150 Type B, B+ and C (5 sets) |
| FN-LD10CBL |
Cable for Handheld Teach/Loader Unit |
| FN-PC10CB01 |
Motor Driver Connection Cable for Single-Axis Positioning Unit |
| FN-PC10LD41 |
Handheld Teach/Loader for Single-Axis Positioning unit, CE/UL/cUL |
| FN-PC10SK41 |
Single-Axis Positioning Unit, Main Unit (CE/UL/cUL) |
| FN-X16TS41 |
16 point Discrete Input (CE/UL/cUL) |
| FN-X32TS41 |
32 point Discrete Input (CE/UL/cUL) |
| FN-XY08TS41 |
8 point Discrete Input, 8 point Sink Transistor Output Unit (CE/UL/cUL) |
| FN-XY16SC41 |
16 point Discrete Input, 16 point Source Transistor Output (CE/UL/cUL) |
| FN-XY16SK41 |
16 point Discrete Input, 16 point Sink Transistor Output (CE/UL/cUL) |
| FN-XY32SKS41 |
32 point Discrete Input, 32 point Sink Transistor Output (CE/UL/cUL) |
| FN-Y08RL41 |
8 Relay Discrete Output, 1 Common (CE/UL/cUL) |
| FN-Y16SC41 |
16 point Discrete Source Output (CE/UL/cUL) |
| FN-Y16SK41 |
16 point Discrete Sink Output (CE/UL/cUL) |
| FP-US00 |
AGP3000 Printer Cable 5M: AGP3000 USB port to USB printer |
| GLC000-DIOCB11-MS |
DIO cable 3m, open end for GLC150 Type A1 and A2 |
| GLC100-DIOCON01 |
DIO Connector/cover for GLC150 Type A1 and A2 (qty 5) |
| GLC150-BG41-ADC-24V |
6” Blue/White, Type H2, 2Ain/1out, 16 in, 16 out (source), 24VDC |
| GLC150-BG41-ADK-24V |
6” Blue/White, Type H1, 2Ain/1out, 16 in, 16 out (sink), 24VDC |
| GLC150-BG41-ADPC-24V |
6” Blue/White, Type H2, 2Ain/2out, PT100 32DIO (source), 24VDC |
| GLC150-BG41-ADPK-24V |
6” Blue/White, Type H1, 2Ain/2out, PT100, 32 DIO (sink), 24VDC |
| GLC150-BG41-ADTC-24V |
6” Blue/White, Type H2, 2Ain/2out, TC, 16 in, 16 out (source), 24V |
| GLC150-BG41-ADTK-24V |
6” Blue/White, Type H1, 2Ain/2out, TC, 16 in, 16 out (sink), 24V |
| GLC150-BG41-DNM-24V |
6” Blue/White, Type D, DeviceNet, 32 DIO (sink), 24VDC |
| GLC150-BG41-FLEX-24V |
6” Blue/White, Type B, FN port, 24VDC, UL, CE |
| GLC150-BG41-RSFL-24V |
6” Blue/White, Type C, FN port, RS-232/422, 24VDC, UL, CE |
| GLC150-BG41-XY32KF-24V |
6” Blue/White, Type B+, FN port, 16 in, 16 out (sink), 24VDC |
| GLC150-BG41-XY32SC-24V |
6” Blue/White, Type A2, 16 in, 16 out (source), 24VDC, UL, CE |
| GLC150-BG41-XY32SK-24V |
6” Blue/White, Type A1, 16 in, 16 out (sink), 24VDC, UL, CE |
| GLC150-SC41-ADK-24V |
6” STN 64 Color, Type H1, 2Ain/1out, 32DIO (sink), 24VDC |
| GLC150-SC41-ADPC-24V |
6” STN 64 Color, Type H2, 2Ain/2out, PT100, 32 DIO (source), 24VDC |
| GLC150-SC41-ADPK-24V |
6” STN 64 Color, Type H1, 2Ain/2out, PT100, 32 DIO (sink), 24VDC |
| GLC150-SC41-ADTK-24V |
6” STN 64 Color, Type H1, 2Ain/2out, TC, 16 in, 16 out (sink), 24V |
| GLC150-SC41-XY32KF-24V |
6” STN Color, Type B+, FN port, 32DIO (sink), 24VDC, UL, CE |
| GLC150-SC41-XY32SK-24V |
6” STN Color, Type A1, 16 in, 16 out (sink), 24VDC, UL, CE |
| GLC2300-FNCN01 |
Flex Network Connector for GLC2300 (5 sets) |
| GLC2300-LG41-24V |
5.7” Mono, Integrated Control, Ethernet, CF, 2 Serial, 24VDC, UL, CE |
| GLC2300-TC41-24V |
5.7” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 24VDC, UL, CE |
| GLC2400-TC41-24V |
7.4” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 24VDC, UL, CE |
| GLC2500-TC41-200V |
10.4” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 120VAC UL |
| GLC2500-TC41-24V |
10.4” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 24VDC, UL |
| GLC2600-TC41-200V |
12.1” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 120VAC UL |
| GLC2600-TC41-24V |
12.1” TFT Color, Integrated Control, Ethernet, CF, 2 Serial, 24VDC, UL |
| GP000-IS02-MS |
Series A1S Connects GP/GLC to PLC A1SJ71C24-R2 via RS-232 9 pin D-sub |
| GP000-IS03-MS |
Omron CS1 Cable, Connects to GP/GLC via 25 pin D-sub |
| GP000-IS11-O |
Connects HMI to Siemens S5 via TTY converter, 5m |
| GP070-AT01 |
Mounting Fasteners, 1 set of 4 fasteners for GP/GLC, ST, PanelStation |
| GP070-CL11 |
Mitsubishi CC Link comm module |
| GP070-CN10-O |
Adapter: RS-422 25 Pin D-sub to screw terminal adapter |
| GP070-DN41 |
DeviceNet Slave comm module, UL, CE |
| GP070-IB41 |
Interbus-S Slave comm module |
| GP070-MD11 |
Mitsubishi 2 Port Adapter II A/QnA/FX series for AGP3000, GP/GLC2000 PanelStation |
| GP070-MDCB11 |
GP/GLC2000 RS-422, 5m, for 2 Port Adapter II (GP070-MD11) |
| GP070-MPI-41 |
Connects HMI to Siemens PLC via MPI connection |
| GP070-PF11 |
Profibus DP Slave comm module, no certifications |
| GP077-CFAD10 |
Adapter: Compact Flash card PCMCIA adapter |
| GP077-CFFM10 |
Front Access Panel Mount CF Card Maintenance Unit for GP2500/2600 |
| GP077-MLTE41 |
GP477R Multi Unit E with Ethernet, sound, Compact Flash |
| GP077-SDAD10 |
Multi Unit Pin Jack Adapter for GP/GLC with sound output |
| GP2000-CBLFX/1M-01 |
Mitsubishi Connects HMI to PLC program port FX, FXO via RS-422 25 pin D-sub (note: FXO requires Adapter) |
| GP2000-CBLFX/5M-01 |
Mitsubishi Connects HMI to PLC program port FX, FXO via RS-422 25 pin D-sub (note: FXO requires Adapter) |
| GP2000H-AP232 |
RS-232 Breakout adaptor for use GP2000H –D232-xx cables |
| GP2000H-AP422 |
RS-422 Breakout adaptor for use GP2000H –D422-xx cables |
| GP2000H-AP70CB-D232-3M |
RS-232 cable, 3m, connects GP2000H to GPH70 AP232-O Adapter |
| GP2000H-AP70CB-D422-3M |
RS-422 cable, 3m, connects GP2000H to GPH70 AP232-O Adapter |
| GP2000H-C232-10M |
RS-232 cable, 10m, connects to handheld, other end is open wires |
| GP2000H-C232-3M |
RS-232 cable, 3m, connects to handheld, other end is open wires |
| GP2000H-C422-10M |
RS-422 cable, 10m, connects to handheld, other end is open wires |
| GP2000H-C422-3M |
RS-422 cable, 10m, connects to handheld, other end is open wires |
| GP2000H-D232-10M |
RS-232 cable, 10m, D-Sub connector, connects handheld to GP2000H-AP232 |
| GP2000H-D232-3M |
RS-232 cable, 3m, D-Sub connector, connects handheld to GP2000H-AP232 |
| GP2000H-D422-10M |
RS-422 cable, 10m, D-Sub connector, connects handheld to GP2000H-AP232 |
|
| Part Number: |
Description: |
| GP2000H-D422-3M |
RS-422 cable, 3m, D-Sub connector, connects handheld to GP2000H-AP232 |
| GP2000H-DF10 |
GP2000H Handheld Touch Screen Protection Sheet (Qty 5) |
| GP2000H-EMGD11 |
Replacement emergency switch guard for GP2000H |
| GP2000H-STRAP11 |
Neck Strap for GP2000H |
| GP2000-VM41 |
Video Mix unit for select AGP, GP/GLC Operator Interfaces |
| GP2300-LG41-24V |
5.7” Mono, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2300-SC41-24V |
5.7” STN Color, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2300-TC41-24V |
5.7” TFT Color, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2301H-LG41-24V |
5.7” Mono LCD, CF, 1MB Memory, 320x240 res, 24VDC, UL, CE |
| GP2301H-SC41-24V |
5.7” STN Color LCD CF, 1MB Memory, 320x240 res., 24VDC, UL, CE |
| GP2301-LG41-24V |
5.7” Mono, CF, 1 Serial, 24VDC, UL CL I Div 2, CE |
| GP2301-SC41-24V |
5.7” STN Color, CF,1 serial, 24VDC, UL CL I Div 2, CE |
| GP2301-TC41-24V |
5.7” TFT Color, CF, 1 Serial, 24VDC, UL CL I Div 2, CE |
| GP230-IS11-O |
RS-422 Serial 25 pin D-sub connector to 9 pin D-sub (5M) |
| GP230-IS12-O |
RS-422 Multi-link 25 pin D-sub connector to 9 pin D-sub (5M) |
| GP2400-TC41-24V |
7.4” TFT Color, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2401H-TC41-24V |
6.5” TFT Color LCD, CF, 2MB Memory, 640x480 res., 24VDC, UL, CE |
| GP2401-TC41-24V |
7.4” TFT Color, 1 serial, CF, 24VDC, UL CL I Div 2, CE |
| GP2500-LG41-24V |
10.4” Mono, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2500-SC41-24V |
10.4” STN Color, Ethernet, CF, 2 Serial, 24VDC UL CL I Div 2, CE |
| GP2500-TC11 |
10.4” TFT Color, Ethernet, CF, 2 Serial, 120VAC UL CL I Div 2, CE |
| GP2500-TC41-24V |
10.4” TFT Color, Ethernet, CF, 2 Serial, 24VDC, UL CL I Div 2, CE |
| GP2501-LG41-24V |
10.4” Mono, 1 Serial, CF, 24VDC, UL CL I Div 2, CE |
| GP2501-SC11 |
10.4” STN Color, 1 Serial, CF, 120VAC, UL CL I Div 2, CE |
| GP2501-TC11 |
10.4” TFT Color, 1 Serial, CF, 120VAC, UL CL I Div 2, CE |
| GP2600-TC11 |
12.1” TFT, 2 serial, Ethernet, CF, 120VAC, UL CL I Div 2, CE |
| GP2600-TC41-24V |
12.1” TFT, 2 serial, Ethernet, CF, 24VDC, UL CL I Div 2, CE |
| GP2601-TC11 |
12.1” TFT, 1 serial, CF, 120VAC, UL CL I Div 2, CE |
| GP270-BL00-MS |
Replacement backlight tube for 5” Color or Mono QPJ-2xxxx-xxx |
| GP270-DF10-O |
GP270 Touch Screen Protection Sheet (Qty 10) |
| GP270-LG21-24VP |
4.7” Monochrome LCD RS-232/RS-422 Serial port, 24VDC, CE |
| GP270-LG31-24VP |
4.7” Monochrome LCD RS-232/RS-422 Serial port, 24VDC, UL1950 |
| GP270-SC31-24V |
4.7” STN Color LCD RS-232/RS-422 Serial port, 24VDC, UL1950 |
| GP370-COVER-20P |
GP370 Touch Screen Protection Sheet (Qty 10) |
| GP370-DF10-O |
GP370 Touch Screen Protection Sheet (Qty 10) |
| GP377-IB21 |
Interbus-S Slave comm module |
| GP377-PF21 |
Profibus DP Slave comm module |
| GP37W2-BG41-24V |
6” Blue/White LCD, 1 Serial port, 1MB mem 24VDC, UL, CE |
| GP37W2-DF00 |
GP37W2, GP37W3, QPM-3D200-B2P, GLC150 Protection Sheet (Qty 5) |
| GP37W3-BG41-24V |
5.7” Blue/White LCD, 1 Serial port, 24VDC, UL, CE |
| GP410-IS00-O |
RS-232 Cross Type 25 pin D-sub connector both ends (5M) |
| GP410-IS01-O |
RS-232 Straight Cable with 25 pin D-sub both ends (5M) |
| GP430-IP10-O |
Mitsubishi Connects HMI to Mitsubishi Programming Port |
| GP430-IP11-O |
Mitsubishi FX Connects HMI to Mitsubishi FX Programming Port |
| GP470/477-COVER-10P |
GP470/477R, QPI-2x100-E2P Screen Soft Protection Sheet (Qty 10) |
| GP470/477-DF10 |
GP470/477R Touch Screen Hard Protection Sheet (Qty 5) |
| GP477R-EG11 |
9.1” Amber EL, 1 Serial port, 120VAC |
| GP477R-EG41-24VP |
9.1” Amber EL, 1 Serial port, 24VDC, UL CL I Div 2, CE |
| GP570/577-DF10-O |
GP570/577R Touch Screen Protection Sheet (Qty 5) |
| GP570-BL00-MS |
GP570, QPI-2x100-S2P or TFT QPI-2x100-C2P 10.5 STN and TFT Color Replacement backlight tube |
| GP577RS-BL00-MS |
GP577R-S and QPI-3x200-S2P STN Replacement backlight tube |
| GP577RT-BL00-MS |
GP2500T, GP2501T, GLC2500, GP577R Replacement backlight TFT Color |
| GP577RT-BL00-MS* |
Replacement backlight TFT Color for QPI-CTxE-0000 and QPI-3x200-C2P |
| GP675-DF10-O |
GP675 Touch Screen Protection Sheet (Qty 5) |
| GPH70-AP232-O |
RS-232C GPH70 Breakout adaptor for use with GPH70-D232-MS |
| GPH70-AP422-O |
RS-422 GPH70 Breakout adaptor for use with GPH70-D422-MS |
| GPH70-C232-MS |
RS-232C Cable, 10m, Connects to GP-H70 Handhelds other end is open wires |
| GPH70-C232-O |
RS-232C Cable, 3m, Connects to GP-H70 Handhelds other end is open wires |
| GPH70-C422-O |
RS-422 Cable, 3m, Connects to GP-H70 Handhelds other end is open wires |
| GPH70-D232-MS |
RS-232C Cable, 10m, D-Sub connector, connects handheld to GPH70-AP232-O |
| GPH70-D422-MS |
RS-422 Cable, 10m, D-Sub connector, connects handheld to GPH70-AP232-O |
| GPH70-DF10-O |
GPH70, QPH70 Handheld Touch Screen Protection Sheet (Qty 10) |
| GPL-AXCN01 |
Flex Network AUX Connector for GLC2500, GLC2600 (Qty 1) |
| GPM-AXCN01 |
Flex Network AUX Connector for GLC2400 (Qty 1) |
| GPPRO-03-SW-SUITE |
GP-PRO 03 Software Suite: Includes: GPPRO 03, Pro-Server, GP Web |
| GPPRO-CNT01W-P03 |
Upgrade to GP-PRO/PBIII C-Package 03 –Requires serial number of previous software version |
| GPW-CB02 |
GP/GLC/ST/LT/PanelStation RS-232 HMI Programming Cable: Connects HMI to PC Port 9 pin D-Sub (not for use with AGP3000 products) |
| GPW-CB03 |
USB HMI Programming Cable: Connect HMI to PC USB port(not for use with AGP3000 products) |
| GW-CJ01-CLTUL |
Unlimited GP-Web Client Licenses |
| GW-CJ01-V16 |
GP-Web Version 1.6, includes 3 concurrent CL Ient Licenses and PDF manuals |
| HMI-ADP-001 |
Adapter plate mounts 9” GP477R, QPI-3x200-E2P in a 10.5” cutout |
| HMI-BEZ-201 |
Stainless Steel NEMA 4X Bezel for GP270 or QPJ 5” units |
| HMI-BEZ-202 |
Stainless Steel NEMA 4X Bezel for GP477R, QPI-3x200-E2P 9” EL units |
| HMI-BEZ-203 |
Stainless Steel NEMA 4X Bezel for GP577R 10.5” Color |
| HMI-BEZ-204 |
Stainless Steel NEMA 4X Bezel for GP377, AGP3300, QPK 6” units |
| HMI-BEZ-205 |
Stainless Steel NEMA 4X Bezel for GP675 12.1” Color |
| HMI-BEZ-403 |
Stainless Steel NEMA 4X Bezel for GP2500, GLC2500, AGP3600, QPI-3x200-x2P 10.4” units |
| HMI-BEZ-405 |
Stainless Steel NEMA 4X Bezel for GP260x 12.1” |
| HMI-BEZ-406 |
Stainless Steel NEMA 4X Bezel for GP/GLC2400, AGP3400, QPG 7.4” |
| HMI-BEZ-407 |
Stainless Steel NEMA 4X Bezel for AGP3750 15” |
| HMI-CAB-A02 |
RS-232C/RS-422 cable, 12’, connects GPH70 handheld to HMI-JBX-201 |
| HMI-CAB-A02-25X |
RS-232C/RS-422 cable, 25’, connects GPH70 handheld to HMI-JBX-201 |
| HMI-CAB-A02-50X |
RS-232C/RS-422 cable, 50’, connects GPH70 handheld to HMI-JBX-201 |
| HMI-CAB-C100 |
Connects HMI to PLC Program Port via RS-422 9 pin D-sub |
| HMI-CAB-C101 |
Connects HMI to PLC Program Port via RS-232 9 pin D-sub |
| HMI-CAB-C102 |
Connects HMI to PLC RS-232 port via RJ45 |
| HMI-CAB-C103 |
DL340 4-pin Connects GP/GLC to PLC RS-232 Modular Phone |
| |
